Home » Products » GPS Motorcycle Tracker » GT08 Car 3G GPS Tracker

GPS Motorcycle Tracker

GT08 Car 3G GPS Tracker

GT08 Car 3G GPS Tracker
  • Description

GT08 GPS Vehicle tracker is the most advanced & cost-effective solution for vehicle security, real-time tracking & fleet management.

It has the following unique functions:

Support 2.4G RFID function or regular Mifare1 IC card reading;

Support wireless immobilizer;

Fuel leaking alarm, speed limiter & fatigue driving alarm;

It is integration with GPS tracker +Car alarm with keyless tag(optional);



Functions for GT08 2G/3G Vehicle GPS Tracker:

1. Track on SMS, Web or APP;

2. RFID for personnel identification, supports 2.4G active RFID reader & Mifare1 IC card reader;(optional)

3. Support 2.4G keyless alarm functions, arm/disarm by SMS/web/calling/RFID tag;

4. Check the car’s real physical address (such as city & street name.);

5. Check the location by LBS directly even there is no any GPS signal;

6. Smart Engine on/off & door open/close status detection;

7. Voice monitoring & 2-way talking(optional);

8. Engine on alarm, door open alarm, power failure alarm, vibration alarm, movement alarm, Geo-fence alarm, over-speed alarm, SOS alarm(optional);

9. Track by time interval or by distance;

10. Stop the car safely by SMS or Web;

11. Upgrade the normal car alarm with GPS tracking function

12. Snap photo and send out via MMS &Email when there is alarm happens, snap the photo via platform;

13. Speed limiter, when the speed is over limitation,the relay will response to slow down the car automatically;

14. Crash alarm, when there is crash & it can detect it automatically;(optional)

15. Fatigue driving alarm, if continuous driving time is over the limitation, the alert will be triggered;

16. Support analog input for fuel monitoring, fuel loss alarm;

17. I/O: 4 digital inputs, 1 analog inputs & 1 digital outputs; 

18. Voltage:10V-60VDC, suitable for motorcycle, car or most big trucks;

19. Smart Power save design for protection of vehicle battery;                

20. Trace optimization when vehicles turns a corner;

21. 8M-bit offline data logger, it can store up to 9,090 waypoints.

22. User-defined SMS contents in different languages;                               

23.Industrial design with high performance ARM7 processor;



Working voltage: +6.0 ~+45VDC

Power Consumption:

Working current: 50mA;

Peak current: 800mA;

Inside Backup battery: Rechargeable 3.7V 500mAh Li-ion battery

Size of the main unit: 99*52*17 (mm)

Weight of the main unit: 76g

Working temperature: -20 ~ 85℃

Humidity: 0 ~ 95%

GSM frequencies: Quad-band: 850MHz/900MHz/1800MHz/1900MHz

GPS chip: U-blox chipset

Receiving ways 20 channels

Working frequencies

1575.42Mhz C/A(GPS)

Receiving sensibility -160dBm

Positioning accuracy ≤10m (wide-open area)

Speed accuracy ≤0.2M/S (wide-open area)

Positioning mode Auto 2D/3D

Hot start 1 sec., average

Warm start 2 sec., average

Cold start 40 sec., average


Standard Packing List

main unit   1pc

4pin wiring 1pc

Microphone 1pc

Manual       1pc

Relay (12VDC)  1pc





RFID Car Alarm Functions and How to use

It is the optional function, the extra RFID reader module & tag are needed.

It supports 2 types of RFID reader: 

(1)2.4G long distance reader/reader module(3-8meters);  

(2) Mifare1 IC card reader (reading distance 3-6cm)

Our active RFID reader module & RFID tag are designed with 2.4G wireless technology. 

The working distance is from 3-8 meters, our active RFID tag has very low power consumption & its battery can work for more than 1 year.

It is not only used for driver ID identification, but also as a key to arm/disarm the vehicle automatically.





Fleet Management GPS Tracking Platform and Free Mobile APP Tracking: